How to Measure?
It's not always apparent how some products are measured. This is especially true when requesting for quotations. Below are quick guides on how we measure our various packaging solutions:
Molded Paper Pulp
width x length x depth x thickness
sample:
260 x 310 x 140 x 3 mm
10.25 x 12.20 x 5.50 x 0.12 in
Corner Posts
width1 x width2 x length x thickness
sample:
50 x 50 x 610 x 4 mm
2 x 2 x 24 x 0.16 in
UFMC Paper Pallets ®
entry direction x width x length x height
sample:
2-way x 1000 x 1200 x 145 mm
2-way x 39.40 x 47.25 x 5.70 in
Separator Sheets (Layer Pads)
width x length x thickness or grammage
sample:
1000 x 1200 x 0.7 mm or 270 GSM
39.40 x 47.25 x 0.03 in or 270 GSM
Paper Rolls
paper type grammage x roll width x weight
sample:
CM 150 GSM x 610 mm x 450 kg
CM 150 GSM x 24 in x 990 lbs
Annealed GI Wires
gauge (thickness) x weight
sample:
gauge 12 ( 2.6 mm ) x 50 kg
gauge 12 ( 0.104 in ) x 110 lbs
Slip Sheets
pull sides x (width + tab) x (length + tab) x thickness
sample:
2-way x (1000 + 75) x (1200 + 75) x 1.5 mm
2-way x (39.40 + 3) x (47.25 + 3) x 0.6 in
Please note target weight capacity (in kg or lbs) for RFQ
CP Pasteboards
width x length x thickness
sample:
660 x 965 x 1.75 mm
26 x 38 x 0.07 in